Important Housekeeping Information for Stainless Steel Sinks
We strongly recommend the following maintenance program is
followed in all cases in order to avoid surface corrosion.
In all applications it is recommended that stainless steel sinks
are rinsed with plenty of fresh water and cleaned with a soft
cloth. The sink should then be dried. Chemical residues should
not be allowed to remain in these sinks for any extended period
of time and thorough cleaning and drying is essential to the
life span of the product.
In school applications this should be done after each lesson. If
this is not practical, it should be carried out at the end of
every school day or when the lab is not to be used for a few
hours.
In commercial laboratory applications this cleaning regime
should be followed on a regular basis during the day and sinks
should not be left for any length of time with chemical residues
in them. Sinks should be cleaned and dried at the end of every
working day.
Please contact us for price and availability.
Laboratory Hardware - Sinks
Stainless Steel
Laboratory grade 316 stainless steel. Traditionally these have
given good service over a number of years. However, good
housekeeping regimes are necessary to avoid possible corrosion
problems.
Please contact us about your application to make certain that this
product is suitable.
Standard sink sizes in 316 stainless steel
| Size mm | Depth mm |
| 305 x 305 | 160 |
| 455 x 305 | 160 |
| 410 x 355 | 170 |
| 510 x 355 | 180 |
| 285 x 230 | 150 |
| 285 x 230 | 120 |
| 355 x 305 | 150 |
| 600 x 400 | 250 |
| 600 x 400 | 300 |
| 520 x 420 | 250 |
Please contact us for product prices and availability.
Special sizes can be fabricated on request but attract a price
premium
